2200mm Wide × 1600mm High

64mm gaps

Alternate Blade & Picket Fence = $709

Approximately $201 per m²

Pricing varies depending on the panel dimensions and the gap selected between the verticals.

Smaller gaps = greater privacy and more aluminium
Larger gaps = more open appearance and lower cost

Simply send us:

• Width × Height of EACH panel
• Gap required between each vertical
• Colour
• Suburb / postcode for delivery

We custom cut your fencing to size in approximately 48 hours, then flat pack everything ready for DIY assembly and installation.

Choose the spacing between the verticals to suit the appearance and privacy level you want.

Smaller gaps provide greater privacy.
Larger gaps create a more open architectural appearance and reduce the overall cost.

The 65mm-wide pickets and 65mm-deep blades alternate across the panel to create the distinctive architectural look.

Our system is designed specifically for DIY assembly.

• 40 × 40mm rear-mounted top and bottom rails
• Rails help conceal the fixing screws from the front
• Heavy-duty aluminium construction
• Unique screw-fixed NO-WELD system
• Brackets and screws included
• End caps included
• Plugs supplied for unused pre-drilled rail holes
• 10-year powder-coat guarantee
• Maximum panel width: under 2700mm

Because this Alternate Blade & Picket design allows customised spacing, some additional holes may need to be drilled during assembly.

Allow approximately 30 minutes additional assembly time per panel compared with our standard pre-drilled fencing systems.

Available in:

Satin Black
Gloss White
Dark Grey / Monument

76 × 76mm Aluminium Posts = $40 per metre

Posts are custom cut to the length required.

Matching post caps and bases are also available.

We are a Brisbane factory-direct supplier specialising in custom-cut DIY aluminium fencing.

Orders are custom cut twice each week, with most standard custom-cut orders ready in approximately 48 hours.

This is a DIY supply-only system.

No home installation or site measuring is required — simply provide us with your panel dimensions and we cut everything ready for assembly.

Our DIY aluminium fencing can be flat packed and freighted Australia-wide.

Flat Rate Freight Guide:

Brisbane North — $140
Brisbane South — $200
Gold Coast / Ipswich / Sunshine Coast — $250
Sydney / Rockhampton — $350
Melbourne / Townsville — $450

For other locations, simply send us your suburb and postcode and we can provide a freight quote.